Replacing the evaporator fan motor in a Maytag or Kenmore bottom freezer refrigerator is a relatively simple repair that can be done in a few steps. First, you will need to unplug the refrigerator from the wall and remove the shelves, drawers, and other removable parts from the freezer. Once everything is removed, you will need to locate the evaporator fan motor, which is usually located behind the evaporator coils in the back of the freezer. Once you have located the fan motor, you will need to remove the mounting screws and disconnect the wiring harness. Once the fan motor is disconnected, you can install the new fan motor in the same location. Make sure to reconnect the wiring harness and secure the mounting screws. Finally, you will need to replace the shelves, drawers, and other removable parts before plugging the refrigerator back into the wall. With these steps, you should be able to easily replace the evaporator fan motor in your Maytag or Kenmore bottom freezer
How To Replace Maytag Bottom Freezer Evaporator Fan Motor Kenmore Bottom Freezer evaporator fan motor
The evaporator fan motor in a Maytag bottom freezer refrigerator is typically located at the back of the unit, near the compressor. To replace the motor, you will need to unplug the refrigerator and remove the rear panel. You will then need to locate the fan motor, which is usually held in place by two screws. Once you have located the fan motor, you will need to remove the screws and disconnect the wiring harness from the motor. Once the motor is removed, you can install the new motor and reconnect the wiring harness. Finally, you will need to reattach the rear panel and plug the refrigerator back in.
How To Replace Maytag Bottom Freezer Evaporator Fan Motor Kenmore Bottom Freezer
1. Unplug the refrigerator from the power source.
2. Remove the shelves and drawers from the freezer.
3. Remove the screws that hold the evaporator fan motor in place.
4. Disconnect the wiring harness from the fan motor.
5. Remove the old fan motor from the freezer.
6. Install the new fan motor in the same position as the old one.
7. Reconnect the wiring harness to the new fan motor.
8. Secure the fan motor in place with the screws.
9. Replace the shelves and drawers in the freezer.
10. Plug the refrigerator back into the power source.
Replacing a Maytag bottom freezer evaporator fan motor with a Kenmore bottom freezer is a relatively easy process. All you need is the correct size fan motor, a few basic tools, and some patience. Once the old fan motor is removed, the new fan motor can be installed in its place. Be sure to follow the manufacturer’s instructions carefully and double check all connections before powering on the fan motor. With proper care and maintenance, your new fan motor should provide years of reliable service.