Replacing the heating element in a Kenmore dryer is a relatively straightforward process. It requires some basic tools and a bit of time, but the end result is a dryer that works like new. To start, you’ll need to unplug the dryer from the wall outlet and remove the back panel. Once the panel is removed, you’ll be able to access the heating element. Disconnect the wires from the heating element and remove the screws that hold it in place. Then, you can install the new heating element and reattach the wires. Finally, replace the back panel and plug the dryer back in. With a little bit of effort, you’ll have a working dryer in no time.
How To Replace Heating Element In Kenmore Dryer
Replacing the heating element in a Kenmore dryer is a relatively simple process. First, unplug the dryer from the power source and remove the back panel. Next, locate the heating element and disconnect the wires. Once the wires are disconnected, remove the mounting screws and pull the element out. Replace the old element with a new one and reattach the mounting screws. Reconnect the wires and replace the back panel. Finally, plug the dryer back in and test the new heating element.
How To Replace Heating Element In Kenmore Dryer
1. Unplug the dryer from the wall outlet and shut off the gas supply if it’s a gas dryer.
2. Remove the back panel of the dryer to access the heating element.
3. Disconnect the wires from the heating element.
4. Remove the mounting screws that hold the heating element in place.
5. Pull the heating element out of the dryer.
6. Install the new heating element and secure it with the mounting screws.
7. Reconnect the wires to the new heating element.
8. Replace the back panel and plug the dryer back in.
9. Turn on the gas supply if it’s a gas dryer.
10. Test the dryer to make sure the heating element is working properly.
Replacing the heating element in a Kenmore dryer is a relatively simple process. First, unplug the dryer, remove the back panel, and disconnect the wires from the heating element. Then, remove the heating element and replace it with a new one. Reattach the wires and back panel, and plug the dryer back in. Finally, test the dryer to make sure it is working properly. With a few simple steps, you can easily replace the heating element in your Kenmore dryer.