Replacing the defrost timer on a Viking refrigerator freezer is a relatively simple task that can be completed in just a few steps. The defrost timer is responsible for controlling the defrost cycle of the refrigerator and freezer, and when it malfunctions, it can cause the refrigerator to not cool properly. Replacing the defrost timer is a cost-effective way to fix the problem, and it doesn’t require any special tools or skills. In this guide, we’ll walk you through the steps of replacing the defrost timer on a Viking refrigerator freezer.
How To Replace Defrost Timer On Viking Refrigerator Freezer
Replacing the defrost timer on a Viking refrigerator/freezer can be a relatively easy task. The first step is to locate the timer, which is usually mounted on the back of the refrigerator. Once located, the power to the refrigerator should be shut off and the timer should be disconnected from the wiring harness. The old timer should then be removed and the new timer should be installed in its place. The wiring harness should then be reconnected to the new timer and the power to the refrigerator should be turned back on. Finally, the timer should be adjusted to the correct settings and the refrigerator should be tested to ensure it is working properly.
How To Replace Defrost Timer On Viking Refrigerator Freezer
1. Unplug the refrigerator from the power outlet.
2. Locate the defrost timer. It is usually located behind the refrigerator, near the compressor.
3. Remove the screws that hold the timer in place.
4. Disconnect the wiring harness from the timer.
5. Install the new timer and reconnect the wiring harness.
6. Secure the timer in place with the screws.
7. Plug the refrigerator back into the power outlet.
8. Set the timer according to the manufacturer’s instructions.
Replacing the defrost timer on a Viking refrigerator freezer is a relatively simple process that requires a few basic tools and some patience. The most important step is to make sure that the power to the unit is disconnected before beginning the process. Once the power is disconnected, the old defrost timer can be removed and the new one installed. The wiring connections should be checked to ensure proper installation and the power reconnected. With the new timer in place, your Viking refrigerator freezer should be back up and running in no time.