Replacing the belt on a 1997 Maytag dryer is a relatively simple job that can be completed in about an hour. Before beginning, make sure to unplug the dryer and wear protective gloves to protect your hands. You will also need to gather the necessary tools, such as a Phillips screwdriver, a flathead screwdriver, and a new belt. To begin, remove the front panel of the dryer by removing the two screws at the bottom.
Then, remove the screws that secure the drum to the back panel. Once the drum is removed, you can access the belt and remove it. Finally, install the new belt and reassemble the dryer. With these steps, you can easily replace the belt on your 1997 Maytag dryer.
How To Replace Belt On 1997 Maytag Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the back panel of the dryer.
3. Remove the old belt from the pulleys.
4. Make sure the pulleys are clean and free of debris.
5. Measure the old belt and buy a new belt of the same size.
6. Place the new belt around the drum and the motor pulley.
7. Make sure the belt is taut and properly aligned.
8. Replace the back panel of the dryer.
9. Plug the dryer back into the wall outlet.
10. Test the dryer to make sure it is working properly.
In conclusion, replacing the belt on a 1997 Maytag dryer is a relatively simple process. First, unplug the dryer and remove the lint filter. Then, remove the front panel and the drum. Next, remove the old belt and replace it with the new one. Finally, reassemble the dryer and plug it back in. With a few simple steps, you can easily replace the belt on your 1997 Maytag dryer.