Replacing a motor coupler for a Whirlpool washer can be a simple task if you have the right tools and knowledge. This guide will provide you with the necessary steps to replace a motor coupler on a Whirlpool washer. Before beginning, make sure that you have the correct motor coupler for your specific model of Whirlpool washer. You will also need a Phillips head screwdriver, a flathead screwdriver, and a pair of pliers. Now you are ready to begin.
How To Replace A Motor Coupler For Whirlpool Washer
1. Unplug the washer from the power source and turn off the water supply.
2. Remove the front panel of the washer and locate the motor coupler.
3. Disconnect the wires from the motor coupler.
4. Remove the screws that secure the motor coupler to the motor and remove the old coupler.
5. Insert the new motor coupler and secure it with the screws.
6. Reconnect the wires to the new motor coupler.
7. Replace the front panel of the washer and plug it back into the power source.
8. Turn on the water supply and test the washer.
Replacing a motor coupler for a Whirlpool washer is a fairly straightforward process. After unplugging the washer, you’ll need to remove the back panel and disconnect the wires. You’ll then need to remove the motor and replace the coupler. Once the new coupler is in place, you’ll need to reconnect the wires, replace the back panel, and plug the washer back in. With a few simple steps, you can have your Whirlpool washer up and running again in no time.