Replacing a dryer belt on Whirlpool models is a relatively simple repair that can be completed in a few steps. Before beginning, make sure to unplug the dryer and wear protective gloves to avoid injury. You will need a Phillips screwdriver and a new dryer belt. First, remove the back panel of the dryer. Then, remove the old belt from the motor and the drum. Next, place the new belt around the drum and thread it through the pulleys. Finally, replace the back panel and secure it with the screws. After replacing the belt, plug the dryer back in and test it to make sure it is running properly.
How To Replace A Dryer Belt On Whirlpool Models
1. Unplug the dryer from the wall outlet.
2. Slide the dryer away from the wall and remove the back panel.
3. Loosen the tensioner pulley and remove the old belt.
4. Feed the new belt around the drum and through the pulley.
5. Tighten the tensioner pulley and replace the back panel.
6. Slide the dryer back into place and plug it into the wall outlet.
Replacing a dryer belt on Whirlpool models is a relatively simple task that can be done in a few steps. First, unplug the dryer, remove the front panel, and remove the old belt. Then, install the new belt, replace the front panel, and plug the dryer back in. Finally, test the dryer to make sure it is working properly. With the right tools and a little patience, anyone can replace a dryer belt on Whirlpool models.