Removing the door handles from a Whirlpool refrigerator is a relatively simple task that can be completed in a few steps. Before you begin, make sure that the refrigerator is unplugged and the doors are completely open. You will need a Phillips head screwdriver and a small flat head screwdriver to complete the task. Begin by locating the two screws on the inside of the door handle. Use the Phillips head screwdriver to remove the screws and set them aside. Once the screws are removed, you will be able to slide the handle off of the door. If the handle is stuck, use the flat head screwdriver to gently pry it off. Once the handle is removed, you can then reattach it to the other side of the door. Finally, replace the screws and plug the refrigerator back in.
Popular: How To Remove Drawers From Whirlpool Refrigerator
How To Remove Whirlpool Refrigerator Door Handles
1. Unplug the refrigerator from the wall outlet.
2. Remove the screws from the door handle. There should be two screws located on the underside of the handle.
3. Pull the handle away from the door.
4. Unscrew the screws that are holding the handle in place.
5. Remove the handle from the refrigerator door.
6. Clean the area where the handle was located.
7. Install the new Whirlpool door handles.
8. Secure the handle with the screws.
9. Plug the refrigerator back into the wall outlet.
Suggested: How To Adjust Whirlpool Refrigerator Temperature Control
How To Remove Whirlpool Refrigerator Door Handles
Removing whirlpool refrigerator door handles is an easy process that requires minimal tools and effort. First, locate the screws that secure the handle to the refrigerator door. Remove the screws and then carefully pull the handle away from the door. If the handle is held in place with clips, use a flathead screwdriver to carefully pry the clips away from the door. Once the handle is removed, you can replace it with a new Whirlpool door handles or reinstall the original handle. With a few simple steps, you can easily remove whirlpool refrigerator door handles.