Removing the water tray from a Maytag refrigerator freezer on top can be a simple process. Before attempting to remove the water tray, make sure the refrigerator is unplugged and the water supply is shut off. To begin, locate the water tray on the back wall of the freezer compartment. It will be located on the top shelf, near the back of the freezer. Once you have located the tray, use a flathead screwdriver to remove the screws that hold it in place. Once the screws are removed, carefully lift the tray out of the freezer. The tray can then be emptied and cleaned. After cleaning, the tray can be re-installed by reversing the steps above.
How To Remove Water Tray From Maytag Refrigerator Freezer On Top
1. Unplug the refrigerator from the wall outlet.
2. Open the refrigerator door and locate the water tray at the bottom of the freezer.
3. Remove the screws that hold the water tray in place.
4. Pull the water tray out of the freezer.
5. Dispose of the water tray.
6. Replace the screws that held the water tray in place.
7. Plug the refrigerator back into the wall outlet.
Removing the water tray from a Maytag refrigerator freezer on top is a relatively simple process. The first step is to locate the water tray and remove the screws that hold it in place. Once the screws are removed, the water tray can be carefully lifted out of the refrigerator. It is important to be careful when removing the water tray to avoid damaging the refrigerator or spilling water on the floor. Once the water tray is removed, the refrigerator can be cleaned and the water tray can be cleaned and replaced as necessary.