Removing the water inlet screen from a Frigidaire washing machine is a simple process that can be completed in a few easy steps. Before beginning, make sure to unplug the washing machine from the wall outlet and turn off the water supply. Once the power and water supplies are turned off, you can begin to remove the water inlet screen. First, locate the water inlet valve on the back of the washing machine. There should be two hoses connected to the valve. Disconnect both hoses from the valve and remove the screws that hold the water inlet valve in place. Carefully remove the valve and set it aside. You should now see the water inlet screen. Use a flathead screwdriver to gently pry the screen out of its housing. Once the screen is removed, it can be cleaned with a soft brush or cloth.
How To Remove Water Inlet Screen On Frigidaire Washing Machine
Removing the water inlet screen on a Frigidaire washing machine is a relatively simple process. First, unplug the machine from the wall outlet and turn off the water supply. Then, locate the water inlet valve on the back of the machine and unscrew the hoses connected to it. Next, remove the screws holding the water inlet valve in place and carefully pull it out. Finally, remove the water inlet screen from the valve and clean it with a soft brush. Reattach the water inlet valve and hoses, and plug the machine back in.
How To Remove Water Inlet Screen On Frigidaire Washing Machine
1. Unplug the washing machine from the power source.
2. Locate the water inlet screen. It is usually located on the back of the machine, near the water inlet valve.
3. Using a flathead screwdriver, gently pry off the cover of the water inlet screen.
4. Remove the water inlet screen from the washing machine.
5. Clean the screen with a soft brush and warm, soapy water.
6. Rinse the screen with clean water and dry it with a soft cloth.
7. Reinstall the water inlet screen and the cover.
8. Plug the washing machine back into the power source.
Removing the water inlet screen on a Frigidaire washing machine is a relatively easy task. All that is required is a flat-head screwdriver and a pair of needle-nose pliers. First, locate the water inlet screen on the back of the machine. Then, use a flat-head screwdriver to remove the screws that hold the screen in place. Finally, use the needle-nose pliers to remove the screen. Once the screen is removed, it can be cleaned or replaced as needed.