Removing the detergent drawer from a front-loading Maytag washing machine is a relatively simple process that requires minimal tools. Before beginning, make sure the power to the washing machine is turned off and unplugged. Next, locate the two screws on the top of the detergent drawer. Using a Phillips screwdriver, unscrew the two screws and remove them. Once the screws are removed, the detergent drawer should come out easily. If it does not, gently pull on the drawer until it comes out. Once the detergent drawer is removed, you can clean it or replace it with a new one.
How To Remove The Detergent Draw From A Front Loading Maytag Washing Machine
Removing the detergent draw from a front loading Maytag washing machine is a simple process. First, open the door of the washing machine and locate the detergent draw. It is usually located near the bottom of the machine, near the front. Next, pull the detergent draw straight out of the machine. If it is stuck, use a flathead screwdriver to gently pry it out. Finally, clean the detergent draw with a damp cloth and some detergent. Once it is clean, it can be reinserted back into the machine.
How To Remove The Detergent Draw From A Front Loading Maytag Washing Machine
1. Unplug the washing machine from the wall outlet.
2. Open the washing machine door and locate the detergent drawer.
3. Pull the detergent drawer out of the washing machine.
4. Unscrew the two screws that hold the detergent drawer in place.
5. Lift the detergent drawer out of the washing machine and set it aside.
6. Disconnect the water supply line from the detergent drawer.
7. Disconnect the electrical wiring from the detergent drawer.
8. Remove any remaining screws or clips that are holding the detergent drawer in place.
9. Lift the detergent drawer out of the washing machine and set it aside.
Removing the detergent drawer from a Maytag front-loading washing machine is a relatively simple process. First, locate the two release tabs on the top of the drawer. Pull these tabs up and out to unlock the drawer. Then, pull the drawer out of the machine. Once the drawer is removed, you can clean it and replace it back into the machine. With the release tabs locked back in place, the drawer should be securely held in place. With a few simple steps, you can easily remove and replace the detergent drawer from a Maytag front-loading washing machine.