Removing the agitator from a Kenmore washing machine is a relatively simple process. It requires basic tools and a few steps to complete. Before you begin, make sure to unplug the washing machine from the power source and turn off the water supply. This will help prevent any potential hazards. Once you have done this, you can begin the process of removing the agitator. Here are the steps you need to take:
1. Locate the agitator and remove any fabric softener caps or other items that may be blocking access.
2. Use a screwdriver to remove the screws that hold the agitator in place.
3. Carefully lift the agitator out of the washing machine.
4. Inspect the agitator for any damage or debris.
5. Clean the agitator and the area around it.
6. Reinstall the agitator and secure it with the screws.
How To Remove The Agitator From A Kenmore Washing Machine
Removing the agitator from a Kenmore washing machine is a relatively simple process. First, unplug the machine from the wall and shut off the water supply. Next, locate the agitator and remove the cap from the top of the agitator. Using a flat head screwdriver, remove the retaining ring that holds the agitator in place. Once the ring is removed, the agitator should come out easily. Finally, clean the area around the agitator and replace the retaining ring. With the agitator removed, the machine is ready to be reassembled.
How To Remove The Agitator From A Kenmore Washing Machine
1. Unplug the washing machine from the wall outlet and shut off the water supply.
2. Place a towel or blanket on the floor beneath the agitator.
3. Remove the fabric softener dispenser cup, if present, by unscrewing it from the top of the agitator.
4. Unscrew the agitator bolt with a socket wrench and remove the agitator from the washing machine.
5. Remove the rubber washer from the bottom of the agitator and discard.
6. Clean the agitator and the area around the agitator with a damp cloth.
7. Install the new agitator by placing the rubber washer on the bottom of the agitator and screwing the agitator bolt into the washing machine.
8. Reinstall the fabric softener dispenser cup, if present.
9. Plug the washing machine back in.
Removing the agitator from a Kenmore washing machine is a relatively simple process. First, unplug the machine and remove the fabric softener dispenser cup. Then, use a socket wrench to remove the bolt located at the base of the agitator. Finally, lift the agitator out of the machine and discard it. With these steps, you can easily remove the agitator from a Kenmore washing machine.