Removing the lower drawers from a Maytag freezer is a relatively simple process. To begin, make sure the power to the appliance is turned off. Then, locate the screws that secure the drawers to the freezer. Depending on the model, these screws may be located on the back or side of the freezer. Once the screws are removed, the drawers can be gently pulled out of the freezer. If the drawers are stuck, use a putty knife to carefully pry them loose. Once the drawers are removed, you can clean them and replace them if needed.
How To Remove Lower Draws From Maytag Freezer
1. Unplug the freezer from the wall outlet.
2. Open the freezer door and locate the lower drawer.
3. Pull the drawer out as far as it will go.
4. Locate the drawer release lever on the left side of the drawer.
5. Push the lever down to release the drawer from the freezer.
6. Gently pull the drawer out of the freezer.
7. Place the drawer on a flat surface.
8. Dispose of the contents of the drawer.
9. Clean the drawer with a mild detergent and warm water.
10. Replace the drawer in the freezer and push it back in until it clicks into place.
11. Plug the freezer back into the wall outlet.
In conclusion, removing the lower drawers from a Maytag freezer is a relatively straightforward process. First, make sure the freezer is unplugged and the door is open. Then, locate the two screws that hold the drawer in place and remove them. Finally, pull the drawer out of the freezer and set it aside. With a few simple steps, the lower drawers can be removed from the Maytag freezer.