Removing the ice bin from your Whirlpool refrigerator is a relatively simple task that can be completed in a few steps. Before starting, make sure the refrigerator is unplugged and the ice bin is empty. Once you have done this, you can begin the process of removing the ice bin.
First, locate the two tabs on the front of the ice bin. These tabs are located on the bottom of the bin and can be easily seen. Push the tabs inwards and lift the bin up and out of the refrigerator. You may need to use a bit of force to get the bin out.
Once the ice bin is out, you can clean it as necessary. To reinstall the bin, simply slide it back into the refrigerator and press down until it clicks into place. Make sure the tabs are securely in place before plugging the refrigerator back in.
How To Remove Ice Bin On Whirlpool Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Locate the screws at the top of the ice bin.
3. Remove the screws and lift the ice bin up and out of the refrigerator.
4. Disconnect the water line from the back of the ice bin, if applicable.
5. Place the ice bin on a flat surface and remove any remaining screws.
6. Pull the ice bin away from the refrigerator and discard it, or keep it for future use.
How To Remove Ice Bin On Whirlpool Refrigerator
In conclusion, removing an ice bin from a Whirlpool refrigerator is a relatively simple task. First, locate the ice bin and remove the screws that hold it in place. Then, carefully lift the ice bin out of the refrigerator and set it aside. Finally, use a vacuum cleaner to remove any remaining ice or debris from the ice bin compartment. With these steps, you should be able to easily remove an ice bin from a Whirlpool refrigerator.