Removing the heating element from a Whirlpool Duet dryer is a relatively simple process. It requires only a few basic tools and a bit of patience. To begin, you will need to unplug the dryer from the wall outlet. Once the power is disconnected, you will need to remove the back panel of the dryer. This can be done by unscrewing the screws that hold the panel in place. Once the panel is removed, you will need to locate the heating element. It will be located near the bottom of the dryer and will be connected to two wires. Disconnect the wires from the heating element and then unscrew the two screws that hold the element in place. Once the screws are removed, the heating element should come out easily. Finally, you can discard the old heating element and install the new one.
How To Remove Heating Element From Whirlpool Duet Dryer
1. Unplug the dryer from the wall outlet.
2. Remove the lint filter and lint filter housing.
3. Remove the two screws that secure the top panel to the back panel.
4. Lift the top panel off the dryer and set aside.
5. Locate the heating element on the back panel.
6. Disconnect the two wires connected to the heating element.
7. Remove the two screws that secure the heating element to the back panel.
8. Pull the heating element away from the back panel and remove it from the dryer.
How To Remove Heating Element From Whirlpool Duet Dryer
Removing the heating element from a Whirlpool Duet dryer is a relatively easy task. First, unplug the dryer from the wall outlet. Next, remove the back panel of the dryer and locate the heating element. Disconnect the two wires leading to the element and then remove the two screws that hold the element in place. Finally, remove the element and replace it with a new one. With the proper tools and a bit of patience, you can easily remove the heating element from your Whirlpool Duet dryer.