Removing the filter from a Whirlpool dishwasher is a relatively simple task. The filter is located at the bottom of the dishwasher, and can be accessed by removing the lower dishrack. Once the dishrack is removed, you will be able to see the filter. To remove the filter, simply unscrew the cap at the bottom of the filter, and pull the filter out. Once the filter is removed, you can clean it with warm, soapy water and a soft brush. Then, re-insert the filter and screw the cap back on. Finally, replace the dishrack and your dishwasher is ready to use.
How To Remove Filter From Whirlpool Dishwasher
1. Unplug the dishwasher from the power source.
2. Locate the filter cover on the bottom of the dishwasher.
3. Remove the screws that secure the filter cover in place.
4. Pull the filter cover off and remove the filter.
5. Clean the filter with warm, soapy water and rinse thoroughly.
6. Reinstall the filter and secure the filter cover with the screws.
7. Plug the dishwasher back in and run a cycle to test it.
How To Remove Filter From Whirlpool Dishwasher
Removing the filter from a Whirlpool dishwasher is a simple process. First, locate the filter in the bottom of the dishwasher. Then, use a flat-head screwdriver to remove the screws that hold the filter in place. Finally, pull the filter out and discard it. Be sure to clean the filter and the area around it before replacing the filter. With these steps, you can easily remove the filter from your Whirlpool dishwasher.