How To Remove Drum From Lg Dryer

Removing the drum from an LG dryer is a straightforward process that can be done in just a few steps. Before you begin, make sure to unplug the dryer from the wall and turn off the gas supply if your dryer is a gas model. You will also need a Phillips head screwdriver and a pair of pliers. Once you have the necessary tools, you can begin the process of removing the drum from your LG dryer.

1. First, open the dryer door and locate the two Phillips head screws located on the inside of the door frame.

2. Remove the screws with the Phillips head screwdriver and then close the door.

3. Next, locate the two screws located on the top of the dryer. These screws will be located on either side of the lint filter.

4. Remove the screws with the Phillips head screwdriver and then remove the lint filter.

Removing the drum from an LG dryer is a relatively simple process that requires a few basic tools. First, unplug the dryer from the wall and remove the lint filter. Next, locate and remove the screws that hold the top panel in place. Once the top panel is removed, access to the drum can be gained. Use a socket wrench to remove the screws that secure the drum to the dryer. Once the screws are removed, carefully lift the drum out of the dryer. Finally, disconnect the belt from the motor and remove the drum from the dryer.

How To Remove Drum From Lg Dryer

1. Unplug the dryer from the power source.

2. Remove the lint filter and the lint filter housing.

3. Remove the screws that secure the top panel to the dryer.

4. Lift the top panel off and set aside.

5. Remove the screws that secure the front panel to the dryer.

6. Lift the front panel off and set aside.

7. Disconnect the wiring harness from the motor and the drum.

8. Remove the screws that secure the drum to the dryer.

9. Carefully lift the drum out of the dryer.

10. Disconnect the belt from the drum.

11. Remove the drum from the dryer.

Removing the drum from an LG dryer is a relatively simple process. All that is needed is a Phillips head screwdriver, a putty knife, and a pair of pliers. First, the front panel must be removed by unscrewing the screws on the top and bottom. Then, the drum can be removed by unscrewing the two screws on the back of the drum. Finally, use the putty knife to remove the belt from the motor pulley, and use the pliers to remove the belt from the drum. With these steps, the drum can be easily removed from the LG dryer.