Removing the drum from a Haier washing machine is a relatively straightforward process. The first step is to unplug the machine from the wall outlet and turn off the water supply. Once the power and water have been disconnected, you can begin to remove the drum. First, you will need to locate the two screws on the back of the machine that hold the drum in place. Once these screws have been removed, you can carefully pull the drum out of the machine. Be sure to keep track of any parts or screws that may have come loose during the process. Once the drum has been removed, you can proceed to clean it or replace it with a new one.
How To Remove Drum From Haier Washing Machine
Removing the drum from a Haier washing machine is a relatively simple process. First, unplug the machine from the wall and turn off the water supply. Then, open the back panel of the machine and locate the drum. Remove the screws that hold the drum in place and carefully pull the drum out of the machine. Once the drum is out, you can access the inside of the machine and clean it. Finally, replace the drum and reassemble the machine. Make sure to plug the machine back in and turn the water supply back on before testing it out.
How To Remove Drum From Haier Washing Machine
1. Unplug the washing machine from the power outlet.
2. Remove the top panel by unscrewing the screws from the back of the machine.
3. Take out the drum by unscrewing the screws that hold the drum in place.
4. Pull out the drum from the machine and place it on a flat surface.
5. Remove the belt from the drum and the motor.
6. Remove the pulley from the motor shaft.
7. Disconnect the wiring from the motor.
8. Remove the screws that hold the motor in place.
9. Pull out the motor from the machine.
10. Clean the drum and the motor before reinstalling them.
In conclusion, removing the drum from a Haier washing machine is not a difficult task. All you need is a few simple tools and a bit of patience. First, unplug the washing machine from the power source. Then, remove the screws that secure the top panel and remove the top panel. Next, remove the screws that secure the front panel and remove the front panel. Finally, disconnect the wiring harnesses and remove the screws that secure the drum. Once the drum is loose, you can carefully lift it out of the washing machine. With these steps, you should be able to remove the drum from a Haier washing machine with ease.