If you own a Whirlpool WFW9150WW01 washer with a pedestal, you may find it necessary to remove the drawer in order to access and maintain the machine. Removing the drawer from the pedestal is a relatively simple process that can be completed with just a few basic tools and a little know-how. In this guide, we will walk you through the steps required to safely and effectively remove the drawer from your Whirlpool washer pedestal, allowing you to easily access and care for your appliance.
How To Remove Drawer From Whirlpool Wfw9150Ww01 Washer Pedestal
To remove the drawer from a Whirlpool WFW9150WW01 washer pedestal, follow these steps:
1. Pull out the drawer as far as possible to expose the metal clips located on both sides of the drawer slides.
2. Use a screwdriver to push in the metal clips on both sides of the drawer slides to release the drawer from the slides.
3. Once the clips are pushed in, lift the drawer up and out of the pedestal.
4. Carefully set the drawer aside in a safe place.
5. To re-install the drawer, simply reverse the steps by aligning the drawer with the slides and pushing it back into place until it clicks securely.
By following these steps, you can easily remove and re-install the drawer from a Whirlpool WFW9150WW01 washer pedestal.
How To Remove Drawer From Whirlpool Wfw9150Ww01 Washer Pedestal
1. Start by opening the drawer of the Whirlpool WFW9150WW01 washer pedestal.
2. Look for the tabs or release clips on either side of the drawer slide. These are usually located near the front of the slide.
3. Press down on these tabs or release clips to release the drawer from the slide.
4. Once both tabs have been pressed down, gently pull the drawer out of the pedestal.
5. If the drawer does not come out easily, check to make sure that both tabs have been properly released before trying again.
6. Place the drawer on a flat surface to prevent it from rolling away or getting damaged.
7. To replace the drawer, simply slide it back into the pedestal until it clicks into place.
8. Ensure that the drawer is securely in place before closing it.
In conclusion, removing the drawer from a Whirlpool WFW9150WW01 washer pedestal is a simple process that can be done with just a few basic tools and a little bit of patience. By following the steps outlined in this guide, you can easily access the back of your washer for maintenance or repair without having to struggle with removing the heavy drawer. Just remember to take your time, follow the instructions carefully, and be gentle with the drawer to avoid any damage. With the right approach, removing the drawer from your washer pedestal can be a quick and stress-free task.