Removing a drawer from a Kenmore washer pedestal is a fairly simple process. All you need is a flathead screwdriver and a few minutes of your time. Before you begin, make sure to unplug the washer from the wall outlet. This will prevent any electrical shock. Now, let’s get started.
Step 1: Locate the two screws on the back of the drawer. Use the flathead screwdriver to remove the screws.
Step 2: Carefully pull the drawer away from the pedestal. There may be some resistance, so be sure to pull slowly and gently.
Step 3: Once the drawer is free from the pedestal, you can lift it out.
That’s all there is to it! Removing a drawer from a Kenmore washer pedestal is an easy process that only requires a few minutes of your time.
Popular: How To Turn Off Child Lock On Kenmore Washer
How To Remove Drawer From Kenmore Washer Pedestal
Removing a drawer from a Kenmore washer pedestal is a simple process. First, unplug the washer from the wall outlet. Next, locate the screws that hold the drawer in place and remove them. Carefully slide the drawer out of the pedestal. Once the drawer is removed, you can access the interior of the pedestal for cleaning or repairs. Be sure to keep track of the screws and any other parts that may have been removed. When finished, simply reassemble the drawer and screws and plug the washer back in.
Recommended: Kenmore Washer Where To Put Fabric Softener
How To Remove Drawer From Kenmore Washer Pedestal
1. Unplug the washer pedestal from the wall outlet.
2. Locate the screws that secure the drawer to the pedestal.
3. Remove the screws using a screwdriver.
4. Carefully pull the drawer out of the pedestal.
5. Disconnect any wiring that may be connected to the drawer.
6. Lift the drawer off the pedestal and set it aside.
Removing a drawer from a Kenmore washer pedestal is a relatively simple process. First, you must locate the two screws on either side of the drawer that hold it in place. Once these screws have been removed, you can pull the drawer out of the pedestal. If the drawer is stuck, you can use a flathead screwdriver or a putty knife to gently pry it loose. With a bit of patience and care, you can easily remove the drawer from your Kenmore washer pedestal.