Removing bottom freezer drawers from a Maytag refrigerator is a relatively simple process. Before beginning, make sure to unplug the refrigerator from the wall outlet and clear the area around the refrigerator. Once the area is clear, you will need to locate the two screws located at the front of the drawer. Use a Phillips head screwdriver to remove the screws. Once the screws are removed, you can pull the drawer out of the refrigerator. If the drawer does not slide out easily, use a putty knife to gently pry it out. Once the drawer is removed, you can clean it and replace it with a new one.
How To Remove Bottom Freezer Drawers Maytag
1. Unplug the refrigerator from the wall outlet.
2. Open the freezer door and locate the drawer slides on the sides of the drawer.
3. Pull the drawer out as far as it will go.
4. Push the drawer release levers on the sides of the drawer to release the drawer from the slides.
5. Lift the drawer up and out of the freezer.
6. Remove the drawer slides from the sides of the drawer.
7. Reinstall the drawer slides onto the new drawer.
8. Slide the drawer into the freezer and make sure that the drawer is properly seated in the slides.
9. Push the drawer release levers to secure the drawer in place.
10. Plug the refrigerator back into the wall outlet.
How To Remove Bottom Freezer Drawers Maytag
Removing the bottom freezer drawers from a Maytag refrigerator is a simple task that can be done in just a few steps. First, remove any items that are stored in the drawer and then locate the drawer slides. Once the slides are located, gently pull the drawer out until it is free from the refrigerator. Finally, gently lift the drawer up and out of the refrigerator. With these steps, you can easily remove the bottom freezer drawers from your Maytag refrigerator.