The Frigidaire LFSS2612TF0 refrigerator is a popular model known for its spacious interior and efficient cooling capabilities. If you need to remove the bottom drawer of this refrigerator for cleaning or maintenance purposes, you’re in the right place. In this guide, we’ll walk you through the step-by-step process of removing the bottom drawer safely and easily. With the proper tools and a little patience, you’ll have your Frigidaire LFSS2612TF0 refrigerator cleaned and maintained in no time. Let’s get started!
How To Remove Bottom Drawer From Frigidaire Lfss2612Tf0 Refrigerator
To remove the bottom drawer from a Frigidaire LFSS2612TF0 refrigerator, you will need to follow these steps:
1. Open the refrigerator door and fully extend the drawer you wish to remove.
2. Locate the clips on either side of the drawer that hold it in place. These clips may be located at the front of the drawer or on the sides.
3. Press down on the clip and pull the drawer towards you to release it from the track.
4. Once the drawer is released from the track, lift it up slightly to remove it from the refrigerator completely.
5. If the drawer is still attached to the track at the back of the refrigerator, gently lift and tilt the front end of the drawer up and pull it towards you to remove it completely.
6. Once the drawer is removed, you can clean it or make any necessary repairs before reinstalling it in the refrigerator.
By following these steps, you can easily remove the bottom drawer from a Frigidaire LFSS2612TF0 refrigerator.
How To Remove Bottom Drawer From Frigidaire Lfss2612Tf0 Refrigerator
1. Empty the drawer: Before attempting to remove the bottom drawer from your Frigidaire LFSS2612TF0 refrigerator, make sure to empty it of any food or items it may be holding.
2. Pull out the drawer: Open the refrigerator door and fully extend the bottom drawer out as far as it will go.
3. Lift the drawer slightly: With the drawer fully extended, lift it up slightly to disengage it from the track or support rails.
4. Tilt the drawer: Tilt the drawer slightly upwards at an angle to clear it from the track and support rails.
5. Slide the drawer out: Once the drawer has been tilted and cleared from the track and support rails, carefully slide it out from the refrigerator.
6. Clean the drawer and refrigerator: With the drawer removed, take the opportunity to clean both the drawer and the inside of the refrigerator where the drawer was located.
7. Reinstall the drawer: To reinstall the drawer, simply reverse the steps above. Tilt the drawer slightly upwards, align it with the track and support rails, and carefully slide it back into place until it is fully seated.
Following these steps should allow you to easily remove the bottom drawer from your Frigidaire LFSS2612TF0 refrigerator for cleaning or maintenance purposes.
In conclusion, removing the bottom drawer from a Frigidaire LFSS2612TF0 refrigerator is a simple process that can be done by following these steps. Start by pulling out the drawer as far as it will go and then lift it up slightly to disengage the tracks. Once the drawer is free from the tracks, carefully remove it from the refrigerator. Remember to empty the drawer and clean it before re-installing it. By following these steps, you can easily remove the bottom drawer from your Frigidaire refrigerator for cleaning or maintenance.