Removing the agitator from a GE washer is a relatively simple process. The agitator is the part of the washer that spins and moves the clothes around during the wash cycle. It is important to remove the agitator if it becomes damaged or if you need to access the interior of the washer for repairs. Here is a step-by-step guide on how to remove the agitator from a GE washer.
1. Unplug the washer from the wall outlet.
2. Locate the agitator. It is the large cylinder in the center of the washer.
3. Remove the fabric softener dispenser cup, if present.
4. Use a screwdriver to remove the screws that secure the agitator to the washer.
5. Pull the agitator straight up to remove it from the washer.
How To Remove Agitator On Ge Washer
Removing the agitator from a GE washer is a relatively simple process. First, unplug the washer from the wall outlet and turn off the water supply. Next, locate the two screws on the side of the agitator and remove them. Then, use a flathead screwdriver to pry the agitator off the washer shaft. Finally, lift the agitator off the washer and set it aside. Make sure to keep track of any washers or other parts that may have come off with the agitator.
How To Remove Agitator On Ge Washer
1. Unplug the washer from the power source.
2. Remove the fabric softener dispenser cup from the top of the agitator.
3. Remove the agitator cap by lifting it off.
4. Unscrew the bolt located in the center of the agitator using a socket wrench.
5. Lift the agitator off the drive shaft.
6. Inspect the drive shaft and agitator for any damage or wear and replace if necessary.
7. Reinstall the agitator and bolt.
8. Replace the agitator cap.
9. Replace the fabric softener dispenser cup.
10. Plug the washer back into the power source.
Removing an agitator from a GE washer is a relatively easy task that can be completed in a few steps. First, remove the agitator cap and loosen the retaining nut with a socket wrench. Next, remove the agitator by pulling it straight up. Finally, clean the area around the agitator and reassemble the washer. With these steps, you should now have a GE washer with the agitator removed.