Removing the agitator from a Maytag top-load washer can be a daunting task, but with the right tools and a bit of patience, it can be done. Before attempting to remove the agitator, make sure that the washer is unplugged and that all of the water is drained from the washer. You will also need a flathead screwdriver and a pair of pliers. Once you have all of the necessary tools, you can begin the process of removing the agitator from the washer.
How To Remove Agitator From Maytag Top Load Washer
1. Unplug the washer from the wall outlet and shut off the water supply.
2. Turn off the hot and cold water supply valves.
3. Place a bucket underneath the washer to catch any water that may spill out.
4. Remove the screws that secure the agitator to the washer tub.
5. Pull the agitator straight up and out of the washer.
6. Clean the area around the agitator shaft and inspect for any damage or debris.
7. Install the new agitator and secure it with the screws.
8. Turn the water supply valves back on and plug the washer back into the wall outlet.
Removing the agitator from a Maytag top-load washer is a relatively simple process. First, you should unplug the washer and turn off the water supply. Next, you should remove the top portion of the washer by unscrewing the screws and lifting the top off. Once the top is off, you can locate the agitator and unscrew the bolt that holds it in place. Finally, you can pull the agitator out of the washer and replace it with a new one. With a few simple steps, you can easily remove the agitator from your Maytag top-load washer.