How To Remove Agitator From Maytag Bravos Washer – Guide

Removing the agitator from a Maytag Bravos washer is a relatively simple process that can be done with a few basic tools. Before you begin, make sure that the washer is unplugged and the water supply to the washer is turned off. You will need a flathead screwdriver and a pair of pliers. Start by locating the agitator cap in the center of the washer. Use the flathead screwdriver to pry the cap off. Once the cap is off, you will see a bolt in the center of the agitator. Use the pliers to remove the bolt. Once the bolt is removed, you can pull the agitator out of the washer. Make sure to keep all the parts and pieces in a safe place so you can reassemble the washer when you are done.

How To Remove Agitator From Maytag Bravos Washer

To remove the agitator from a Maytag Bravos washer, first unplug the washer from the wall. Then, locate the agitator and remove the fabric softener cap, which is located on the top of the agitator. Next, remove the bolt that holds the agitator in place. This bolt is located on the side of the agitator and is usually a Phillips head screw. Once the bolt is removed, the agitator should easily come out.

How To Remove Agitator From Maytag Bravos Washer

1. Unplug the washer from the wall outlet.
2. Place a large towel or blanket on the floor in front of the washer.
3. Locate the agitator on the top of the washer.
4. Remove the agitator cap by unscrewing it with a Phillips head screwdriver.
5. Remove the bolt that holds the agitator in place with a socket wrench.
6. Lift the agitator off the washer and place it on the towel.
7. Remove the agitator from the washer.

Removing the agitator from a Maytag Bravos washer is a relatively simple process. First, you need to locate the agitator and unscrew the bolt located at the top of the agitator. Once the bolt is removed, you can lift the agitator out of the washer. Once the agitator is removed, you can then reinstall the new agitator and secure it with the bolt. With a few simple steps, you can easily remove the agitator from your Maytag Bravos washer.