The agitator in a Kenmore 110.2002201 washing machine helps to clean clothes by moving them around in the tub. However, if the agitator is not functioning properly or needs to be replaced, it will need to be removed from the machine. In this guide, we will provide step-by-step instructions on how to remove the agitator from a Kenmore 110.2002201 washing machine. By following these instructions carefully, you can successfully remove the agitator and perform any necessary maintenance or repairs on your washing machine.
How To Remove Agitator From Kenmore 110.2002201 Washing Machine
To remove the agitator from a Kenmore 110.2002201 washing machine, you will first need to unplug the machine and turn off the water supply. Next, remove the fabric softener dispenser from the top of the agitator and locate the bolt that holds the agitator in place. Use a socket wrench to loosen and remove the bolt, then grasp the agitator firmly and lift it out of the machine. If the agitator is stuck, you may need to gently rock it back and forth to loosen it before lifting it out. Once the agitator is removed, you can clean or replace it as needed. Always refer to the manufacturer’s instructions or seek professional help if you are unsure about how to safely remove the agitator from your washing machine.
How To Remove Agitator From Kenmore 110.2002201 Washing Machine
1. Unplug the washing machine and turn off the water supply to the machine.
2. Remove the fabric softener dispenser from the top of the agitator by pulling it straight up.
3. Use a screwdriver to remove the screw holding the agitator in place. This screw is located beneath the fabric softener dispenser.
4. Lift the agitator out of the washing machine by pulling it straight up. If the agitator is stuck, you may need to gently rock it back and forth to loosen it.
5. Check the agitator for any damage or wear and tear. If necessary, replace the agitator with a new one.
6. To reassemble the washing machine, simply reverse the steps above. Place the agitator back into the machine, secure it with the screw, and reattach the fabric softener dispenser. Plugin the machine and turn on the water supply.
7. Run a test cycle to ensure that the washing machine is functioning properly.
In conclusion, removing the agitator from a Kenmore 110.2002201 washing machine is a relatively simple process that can be done easily with the right tools and techniques. By following the steps outlined in this guide, you can successfully remove the agitator from your machine and ensure that it continues to function properly. Remember to disconnect the power supply and water sources before starting the removal process, and be sure to consult the owner’s manual for additional guidance if needed. With a little patience and diligence, you can easily remove the agitator from your Kenmore washing machine and keep it in good working condition for years to come.