Removing the agitator from a Maytag washing machine is a relatively straightforward process that requires only a few tools. Before beginning the process, make sure to unplug the washing machine from the wall and turn off the water supply. This will help to ensure your safety and prevent any damage to the machine. Once the power and water have been turned off, you can begin the process of removing the agitator.
How To Remove A Agitator From A Maytag Washing Machine
Removing an agitator from a Maytag washing machine is a relatively simple process. First, unplug the machine from the wall outlet and shut off the water supply. Next, remove the fabric softener dispenser cup, if present. Then, remove the agitator cap by unscrewing it counter-clockwise. After that, use a flathead screwdriver to pry off the agitator retaining ring. Finally, pull the agitator straight up and out of the machine. Once the agitator is removed, the new one can be installed by reversing the steps.
How To Remove A Agitator From A Maytag Washing Machine
1. Unplug the washing machine from the wall.
2. Shut off the water supply to the washing machine.
3. Remove the top panel of the washing machine.
4. Locate the agitator and unscrew the bolt that holds it in place.
5. Lift the agitator out of the washing machine.
6. Clean the area where the agitator was located.
7. Replace the top panel of the washing machine.
8. Turn on the water supply and plug the washing machine back in.
Removing an agitator from a Maytag washing machine is a relatively simple process that can be completed in a few steps. First, disconnect the power to the machine. Next, remove the agitator cap, the fabric softener dispenser, and the agitator bolt. Once these components are removed, the agitator can be lifted out of the machine. Finally, the agitator can be replaced with a new one. With the proper tools and a little patience, the agitator can be removed and replaced with ease.