How To Relevel Maytag Upright Freezer – Guide

If your Maytag upright freezer is not level, you can easily adjust it to make sure it is level. This is important to ensure that the freezer door opens and closes properly and that the compressor operates correctly. To level your Maytag upright freezer, you will need a level, a screwdriver, and a few minutes of time. Follow these steps to level your Maytag upright freezer:

1. Place the level on the top of the freezer. Make sure the bubble is in the center of the level.

2. If the bubble is off-center, you will need to adjust the freezer feet.

3. Locate the adjustable feet on the bottom of the freezer.

4. Use the screwdriver to turn the feet clockwise or counterclockwise to raise or lower the feet.

5. Check the level again to make sure the bubble is in the center.

 

Popular: How To Turn Off Ice Maker In Maytag Fridge

 

How To Relevel Maytag Upright Freezer

1. Unplug the freezer from the wall outlet.

2. Empty the contents of the freezer onto a large, flat surface.

3. Move the freezer away from the wall, and place a level on top of the freezer.

4. Adjust the freezer feet until the bubble in the level is centered.

5. Move the freezer back against the wall, and plug it back into the wall outlet.

6. Put the contents of the freezer back in.

 

Favorite: Where Is The Defrost Drain On A Maytag Refrigerator

 

How To Relevel Maytag Upright Freezer

1. Unplug the freezer from the wall outlet.
2. Remove all items from the freezer.
3. Move the freezer to a level surface.
4. Check the level of the freezer with a bubble level.
5. Adjust the leveling legs on the bottom of the freezer until the bubble level reads level.
6. Plug the freezer back into the wall outlet.
7. Place the items back into the freezer.

 

Suggested: How To Remove Basket From Maytag Freezer

 

In conclusion, leveling a Maytag upright freezer is a relatively simple process that can be done with minimal tools and time. To level the freezer, you will need a level, a wrench, and a screwdriver. First, locate the adjustable feet on the bottom of the freezer and use the wrench to loosen the nuts. Then, use the level to make sure the freezer is level in both directions. Finally, adjust the feet as needed and use the screwdriver to tighten the nuts. With these simple steps, your Maytag upright freezer should be level and ready for use.