If you’re having trouble with your KitchenAid dishwasher, you may need to put it into diagnostic mode to troubleshoot the issue. Diagnostic mode is a special mode that can help you identify and troubleshoot problems with your dishwasher. To put your KitchenAid dishwasher into diagnostic mode, you will need to follow a few simple steps.
First, you’ll need to turn off the power to the dishwasher. This can be done by unplugging the dishwasher from the wall outlet or by switching off the circuit breaker that supplies power to the dishwasher. Next, press and hold the “Normal Wash” and “Heated Dry” buttons at the same time. While continuing to hold the buttons, turn the power back on. Once the dishwasher has powered on, you should see a diagnostic code displayed on the dishwasher’s display. This code will tell you what the issue is with your dishwasher.
How To Put Kitchenaid Dishwasher In Diagnostic Mode
To put a Kitchenaid dishwasher in diagnostic mode, first locate the diagnostic test button on the dishwasher. This button is usually located on the control panel. Once the button is located, press and hold it for three seconds. The diagnostic mode will then be activated. The dishwasher will then run a series of tests to diagnose any issues with the dishwasher. Once the tests are completed, the dishwasher will display any errors that were found. After the errors are addressed and resolved, the dishwasher can be taken out of diagnostic mode by pressing and holding the diagnostic test button for three seconds.
How To Put Kitchenaid Dishwasher In Diagnostic Mode
1. Unplug the dishwasher from the power source.
2. Press and hold the “Normal” and “Heated Dry” buttons simultaneously.
3. Plug the dishwasher back into the power source.
4. Release the buttons when the “Clean” light begins to flash.
5. Press the “Normal” button twice.
6. Press the “Heated Dry” button twice.
7. Press the “Normal” button three times.
8. Press the “Heated Dry” button three times.
9. The dishwasher will now enter diagnostic mode.
Putting your Kitchenaid dishwasher into diagnostic mode is a simple process that can help you troubleshoot any issues you may be having with your appliance. To enter diagnostic mode, press the Normal and Heated Dry buttons simultaneously and hold them for three seconds until the control panel lights up. Once the control panel is lit up, you can use the buttons to cycle through the diagnostic codes and see what the issue is. With this information, you can then take the necessary steps to resolve the issue.