Hotpoint dishwashers are equipped with a diagnostic mode that helps you troubleshoot any issues you may be having with the appliance. This mode can be accessed by pressing a combination of buttons on the dishwasher’s control panel. To put your Hotpoint dishwasher in diagnostic mode, first make sure the dishwasher is powered off. Then, press and hold the “Start/Reset” button for five seconds. After five seconds, release the button and press the “Start/Reset” button again. You will then see the “Diagnostic Mode” appear on the display. You can then use the arrow keys to scroll through the different diagnostic options. Once you have finished troubleshooting, press the “Start/Reset” button again to exit diagnostic mode and return to the normal operating mode.
How To Put Hotpoint Dishwasher In Diagnostic Mode
Hotpoint dishwashers can be put into diagnostic mode to help diagnose and troubleshoot any problems that may arise. To enter diagnostic mode, first power down the dishwasher by unplugging it from the wall. Then press and hold the “Start/Reset” button for three seconds. Next, press and hold the “Normal” button for three seconds. Finally, press and hold the “Heated Dry” button for three seconds. The dishwasher will then enter diagnostic mode and the LED lights will flash to indicate the status of the dishwasher. The diagnostic mode can be exited by pressing and holding the “Start/Reset” button for three seconds.
How To Put Hotpoint Dishwasher In Diagnostic Mode
1. Unplug the dishwasher from the wall outlet.
2. Press and hold the “Start/Reset” button for three seconds.
3. While still holding the “Start/Reset” button, plug the dishwasher back into the wall outlet.
4. Release the “Start/Reset” button.
5. Press the “Start/Reset” button two times.
6. The “Clean” light will begin to flash, indicating the dishwasher is in diagnostic mode.
The Hotpoint dishwasher can be put into diagnostic mode by pressing and holding the start button for 3 seconds. After this, the dishwasher will display a series of codes that can be used to identify and diagnose any potential issues. By using these codes, any issues can be quickly and easily identified and resolved. With this knowledge, you can now easily put your Hotpoint dishwasher into diagnostic mode whenever needed.