Frigidaire dishwashers are equipped with a diagnostic mode that allows you to troubleshoot common problems. To put your Frigidaire dishwasher in diagnostic mode, you will need to press and hold the “Start/Cancel” button for at least 5 seconds. Once the dishwasher has entered diagnostic mode, the indicator light will flash. You can then use the “Option” button to select the desired diagnostic test. After the test is complete, press the “Start/Cancel” button to exit diagnostic mode.
How To Put Frigidaire Dishwasher In Diagnostic Mode
To put a Frigidaire dishwasher into diagnostic mode, first locate the diagnostic test button, which is usually located on the control panel. Once located, press and hold the button for 3 seconds. The dishwasher will then enter diagnostic mode, indicated by a series of flashing lights. To exit diagnostic mode, press and hold the button for 3 seconds again. This will reset the dishwasher and return it to normal operation.
How To Put Frigidaire Dishwasher In Diagnostic Mode
1. Unplug the dishwasher from the power outlet.
2. Press and hold the “Start” button and plug the dishwasher back into the power outlet.
3. Continue to hold the “Start” button until all the lights on the control panel light up.
4. Release the “Start” button and press the “Heated Dry” button three times.
5. Press the “Start” button again. The lights on the control panel should flash to indicate the dishwasher is in diagnostic mode.
After following the steps outlined in this article, you should now have a better understanding of how to put your Frigidaire dishwasher in diagnostic mode. By pressing the “Cancel/Drain” and “High Temp/Air Dry” buttons simultaneously, you can enter diagnostic mode and view the dishwasher’s error codes. This will allow you to troubleshoot any issues you may be having with your dishwasher and make the necessary repairs.