If you need to put your Crosley dishwasher into diagnostic mode, it is a relatively simple process. First, make sure the dishwasher is turned off and unplugged. Next, locate the diagnostic switch, which is usually located in the lower right corner of the dishwasher. Once the switch is located, press and hold it for three seconds. After three seconds, the dishwasher will enter diagnostic mode. You should now be able to access the diagnostic menu and make any necessary adjustments.
How To Put Crosley Dishwasher In Diagnostic Mode
Crosley dishwashers can be put into diagnostic mode to help diagnose any issues that may be occurring with the appliance. To enter diagnostic mode, the user must first unplug the dishwasher from the power source. Next, the user should press and hold the “Normal Wash” and “Heated Dry” buttons simultaneously. While continuing to hold the buttons, plug the dishwasher back into the power source. The dishwasher will enter diagnostic mode and the “Normal Wash” and “Heated Dry” lights will blink. The user can then cycle through the different diagnostic codes by pressing the “Normal Wash” and “Heated Dry” buttons. Once the user has identified the issue, they can press the “Cancel” button to exit diagnostic mode.
How To Put Crosley Dishwasher In Diagnostic Mode
1. Unplug the dishwasher from the power source.
2. Press and hold the Start/Reset button for 10 seconds.
3. Plug the dishwasher back in and release the Start/Reset button.
4. Press and hold the Start/Reset button for 3 seconds.
5. The dishwasher will enter diagnostic mode and the lights will flash.
6. Press the Start/Reset button again to cycle through the diagnostic tests.
7. When the desired diagnostic test is reached, press the Start/Reset button to begin the test.
8. When the test is completed, the dishwasher will return to the normal mode.
To put a Crosley dishwasher in diagnostic mode, you need to press and hold the Start/Reset button for at least 3 seconds. This will cause the dishwasher to enter diagnostic mode. Once in diagnostic mode, the dishwasher will display error codes that can be used to diagnose and troubleshoot any issues. By following these steps, you can easily put your Crosley dishwasher in diagnostic mode and begin troubleshooting any issues you may be having.