How To Put A Maytag Bottom Freezer Refrigerator In Defrost – Solution

If you have a Maytag bottom freezer refrigerator, you may need to put it in defrost mode from time to time. This is a simple process that can be done in just a few steps. To get started, you will need to locate the defrost button on the back of the refrigerator. This button is typically located near the bottom of the unit. Once you have located the button, press and hold it for several seconds until you hear a beep. This indicates that the refrigerator is now in defrost mode. You can then leave the refrigerator in this mode for several hours to allow the ice to melt. Once the ice is melted, you can press the defrost button again to return the refrigerator to its normal operating mode.

How To Put A Maytag Bottom Freezer Refrigerator In Defrost Mode

To put a Maytag bottom freezer refrigerator in defrost mode, press and hold the “Power Freeze” and “Power Cool” buttons at the same time for 5 seconds. The display should then read “Defrost” and the refrigerator will enter defrost mode.

How To Put A Maytag Bottom Freezer Refrigerator In Defrost Mode

1. Unplug the refrigerator from the wall outlet.

2. Remove all food and items from the freezer and refrigerator compartments.

3. Take out all shelves and drawers from the refrigerator and freezer compartments.

4. Place a container or bowl underneath the freezer drain tube to collect any water that may leak out.

5. Locate the defrost timer on the back wall of the refrigerator.

6. Turn the timer to the “Defrost” position.

7. Plug the refrigerator back into the wall outlet.

8. Allow the refrigerator to defrost for at least 24 hours.

9. After 24 hours, turn the timer back to the “Run” position.

10. Reassemble the shelves and drawers and replace all food and items in the refrigerator and freezer compartments.

In conclusion, putting a Maytag bottom freezer refrigerator in defrost mode is a simple process. First, unplug the refrigerator and remove any food items. Then, locate the defrost timer and turn it to the defrost position. Finally, plug the refrigerator back in and wait for the defrost cycle to complete. Following these steps will ensure that your Maytag bottom freezer refrigerator is in defrost mode and ready to be used.