If you have an old Whirlpool air conditioner, you may be wondering how to open it up and get access to the internal components. Opening an old Whirlpool air conditioner is a relatively straightforward process that requires only a few simple tools. Before you start, make sure to unplug the appliance and wear protective gear such as gloves and eyewear. Once you have the necessary safety precautions in place, you can begin the process of opening up your Whirlpool air conditioner.
First, you will need to remove the screws that hold the front panel in place. These screws are usually located on the sides of the appliance. Once the screws are removed, you can carefully lift the front panel off the appliance. Be careful not to damage any of the internal components as you do this.
How To Open Up An Old Whirlpool Air Conditioner
1. Unplug the air conditioner from the wall outlet and move it to a safe and well-ventilated area.
2. Remove the front panel of the air conditioner. This will expose the internal components.
3. Disconnect the power cord from the back of the air conditioner.
4. Remove the screws that hold the top panel in place.
5. Carefully lift the top panel off of the air conditioner and set it aside.
6. Locate the fan motor and remove the screws that hold it in place.
7. Carefully remove the fan motor and set it aside.
8. Remove the screws that hold the evaporator coils in place.
9. Carefully remove the evaporator coils and set them aside.
10. Remove the screws that hold the condenser coils in place.
11. Carefully remove the condenser coils and set them aside.
In conclusion, opening up an old Whirlpool air conditioner is not a difficult task. With the right tools and a bit of patience, you can easily open up the unit and access the components for maintenance or repair. Start by removing the front panel and disconnecting the power supply. Then, unscrew the screws holding the unit in place and carefully lift it off the wall. Finally, use a screwdriver to remove the screws that hold the top and side panels in place. With the panels removed, you can now access the components of the air conditioner.