If your Samsung washer isn’t draining properly, it can be a frustrating experience. Fortunately, there are a few steps you can take to help get your washer draining again. First, make sure the washer is plugged in and the power is turned on. Then, check the drain hose to ensure it is properly connected and there are no kinks or blockages. If the hose is not properly connected, the water will not be able to drain out of the washer. Next, check the drain filter to make sure it is not clogged with lint or other debris. If the filter is clogged, clean it out and then check the drain pump for blockages. Finally, if the pump is still not working properly, you may need to replace it. With these steps, you should be able to get your Samsung washer draining properly again.
How To Make Samsung Washer Drain
1. Unplug the power cord from the wall outlet.
2. Locate the drain hose connected to the back of the washer.
3. Disconnect the drain hose from the back of the washer.
4. Place the open end of the drain hose into a sink or bucket.
5. Turn the washer on to the spin cycle and allow it to drain.
6. Once the water has drained, turn off the washer and disconnect the drain hose.
7. Reattach the drain hose to the back of the washer and plug the power cord back into the wall outlet.
To make sure your Samsung washer drains properly, it is important to regularly check the drain hose for any blockages, clean the filter, and make sure the drain hose is properly connected. Additionally, use a high-efficiency detergent and the correct water temperature to reduce the amount of suds that can clog the drain. Finally, if the washer is still not draining, contact a professional for assistance.