Locking the wheels on a Whirlpool refrigerator is an important safety measure to prevent the appliance from moving around, especially when the refrigerator is being loaded with food or items. It is also important to ensure that the refrigerator is level and secure before locking the wheels. This guide will explain how to properly lock the wheels on a Whirlpool refrigerator.
First, make sure that the refrigerator is level. This can be done by placing a level on the top of the refrigerator and adjusting the feet until the bubble is in the center.
Next, locate the wheels on the bottom of the refrigerator. There should be two wheels on each side of the refrigerator.
Using a wrench, loosen the locking nuts on the wheels. Once the nuts are loose, turn the wheels until they are facing outward.
Finally, tighten the locking nuts to secure the wheels in place. Make sure the wheels are tight and secure before you move the refrigerator.
Suggested: How To Unlock Wheels On Whirlpool Refrigerator
How To Lock Wheels On Whirlpool Refrigerator
If your Whirlpool refrigerator has wheels, you can lock them in place by turning the wheels so that the locking tabs on the wheels are engaged with the floor. This will prevent the refrigerator from moving when you open and close the doors.
Recommended: How To Adjust Temperature On Whirl French Door Refrigerator
How To Lock Wheels On Whirlpool Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Locate the two adjustable feet at the bottom of the refrigerator.
3. Turn the feet clockwise to lower the refrigerator to the floor.
4. Place the wheel locks on the two adjustable feet.
5. Tighten the wheel locks until they are secure.
6. Plug the refrigerator back into the wall outlet.
To lock the wheels on a Whirlpool refrigerator, first make sure that the wheels are in the correct position. Then, use the locking screws provided to secure the wheels in place. Make sure to tighten the screws securely, but do not over-tighten them. Finally, check that the wheels are locked by attempting to move the refrigerator. If the wheels do not move, the locking screws have been successfully installed.