If you have a GE gas oven, lighting it is a straightforward process. Before you light the oven, make sure that the oven is off and that the gas is turned on. After that, you will need to locate the oven’s pilot light. This is usually located near the bottom of the oven and is a small, round metal piece with a hole in the center. Once you have located the pilot light, you will need to light it. To do this, you will need a long-handled lighter or match. Insert the lighter or match into the hole in the pilot light and light it. You should hear a slight hissing sound, indicating that the pilot light is lit. Once the pilot light is lit, you can turn the oven on and it should work properly.
How To Light Ge Gas Oven
GE gas ovens are easy to light and provide a reliable source of heat for cooking. To light the oven, first turn the oven knob to the “Light” position. Then, press down and hold the knob for about 30 seconds, or until the oven igniter sparks and the flame appears. If the flame does not appear, press and hold the knob for another 30 seconds. Once the flame is lit, turn the knob to the desired temperature setting. To turn off the oven, simply turn the knob to the “Off” position. This will extinguish the flame and the oven will be ready for the next time you need to use it.
How To Light Ge Gas Oven
1. Turn on the oven by pressing the “Power” button.
2. Set the oven temperature by pressing the “Temp” button and turning the knob to the desired temperature.
3. Press the “Ignite” button and wait for the oven to light.
4. If the oven does not light, press the “Reset” button and try again.
5. Once the oven is lit, the pilot light indicator will light up.
In conclusion, lighting a GE gas oven is a relatively simple process that can be done in a few steps. First, make sure the oven is in the off position and the gas supply is on. Then, turn the oven knob to the “Light” position and press and hold the ignition button until the oven ignites. If the oven does not light, try again. If it still does not light, check the gas supply and make sure it is on. If it is on, contact a professional for assistance.