Welcome to the installation guide for installing an ice maker on a Maytag MRT311FFFH refrigerator. This guide will provide you with all the information you need to successfully install your new ice maker. We will cover all the necessary steps, from preparing the refrigerator for installation, to connecting the ice maker to the water supply. With the help of this guide, you should be able to complete the installation process in no time. So let’s get started!
How To Install A Ice Maker On A Maytag Mrt311Fffh Refrigerator
1. Make sure the refrigerator is unplugged and the water supply is turned off.
2. Remove the ice maker from the box and place it on a flat surface.
3. Connect the water line to the inlet valve on the back of the refrigerator.
4. Connect the other end of the water line to the inlet valve on the ice maker.
5. Plug the power cord into a grounded outlet.
6. Turn on the water supply and check for any leaks.
7. Place the ice maker in the freezer compartment and secure it with the mounting screws.
8. Set the temperature on the ice maker to the desired setting.
9. Turn on the ice maker and allow it to run for 24 hours before using.
Installing an ice maker on a Maytag MRT311FFFH refrigerator is a relatively simple process. It requires only basic tools and a few simple steps. After ensuring that the water supply line is connected and the ice maker is properly mounted, the ice maker should be connected to the refrigerator’s water supply valve. Once the connections are secure, the ice maker should be tested to ensure that it is working properly. With the help of these instructions, anyone can install an ice maker on a Maytag MRT311FFFH refrigerator.