If you need to get to the evaporator coil on a Maytag refrigerator, the process is relatively simple. First, you will need to unplug the refrigerator from the wall. Then, remove the screws that hold the back panel in place. This will allow you to access the evaporator coil. Depending on the model of your refrigerator, you may need to remove additional parts, such as the fan motor or the condenser fan motor, to gain access to the evaporator coil. Once you have the evaporator coil exposed, you can inspect it for any signs of damage or wear. If necessary, you can replace the evaporator coil with a new one.
How To Get To The Evaporator Coil On A Maytag Refrigerator
To get to the evaporator coil on a Maytag refrigerator, you will first need to unplug the refrigerator from the wall and remove the back panel. Once the back panel is off, you will need to locate the evaporator coil, which is usually located near the top of the refrigerator. Once the evaporator coil is located, you will need to remove the screws that are holding it in place. Once the screws are removed, the evaporator coil can be pulled out. After the evaporator coil is removed, you can access the coils and clean them with a vacuum or brush. Once the coils are cleaned, the evaporator coil can be re-installed and the back panel can be put back on.
How To Get To The Evaporator Coil On A Maytag Refrigerator
1. Unplug the refrigerator from the power source.
2. Remove the screws from the back panel of the refrigerator.
3. Carefully remove the back panel and set it aside.
4. Locate the evaporator coil, which is usually located behind the refrigerator’s main cooling compartment.
5. Carefully remove the screws that are holding the evaporator coil in place.
6. Pull the evaporator coil out of the refrigerator and set it aside.
In conclusion, getting to the evaporator coil on a Maytag refrigerator is relatively simple. First, you’ll need to unplug the refrigerator and remove the back panel. Then, you’ll need to remove the evaporator cover and the evaporator fan. Finally, you’ll need to remove the evaporator coil. With these steps, you should be able to access the evaporator coil and complete any necessary repairs or maintenance.