If you need to access the evaporator coil on an Electrolux refrigerator, the process is fairly straightforward. First, you will need to locate the back panel of the refrigerator. This can usually be found on the top or bottom of the unit, depending on the model. Once you have located the back panel, you will need to remove it. This can be done by unscrewing the screws that are holding it in place. Once the back panel is removed, you will be able to see the evaporator coil. It is usually located near the compressor. You may need to remove other components to gain access to the evaporator coil. Once you have access to the evaporator coil, you can proceed with whatever repairs or maintenance you need to do.
How To Get To The Evaporator Coil On A Electrolux Refrigerator
To get to the evaporator coil on an Electrolux refrigerator, first unplug the refrigerator from the wall outlet. Then, remove the screws that hold the back panel in place and pull the panel away from the refrigerator. Next, locate the evaporator coil, which is usually located behind the refrigerator’s freezer wall. Finally, remove the screws that hold the evaporator coil in place and pull it out of the refrigerator. Once the evaporator coil is removed, it can be cleaned or replaced.
How To Get To The Evaporator Coil On A Electrolux Refrigerator
1. Unplug the refrigerator.
2. Remove the screws that secure the back panel of the refrigerator.
3. Remove the back panel of the refrigerator.
4. Locate the evaporator coil, which is typically located near the top of the refrigerator, behind the fan.
5. Disconnect the electrical wiring from the evaporator coil.
6. Remove the screws that secure the evaporator coil to the refrigerator.
7. Carefully remove the evaporator coil from the refrigerator.
The evaporator coil on an Electrolux refrigerator is located behind the back panel of the refrigerator. To access the evaporator coil, you will need to unplug the refrigerator, remove the screws that hold the back panel in place, and then carefully remove the panel. Once the panel is removed, you should be able to access the evaporator coil. It is important to be careful when handling the evaporator coil, as it can be damaged easily. With the right tools and some patience, you can easily access the evaporator coil on an Electrolux refrigerator.