If you need to access the evaporator coil on an Amana refrigerator, you’ll need to start by unplugging the refrigerator from the wall. Once the power is off, you’ll need to locate the back panel of the refrigerator, which is usually located on the top or side of the unit. You’ll then need to remove the screws that hold the panel in place. Once the panel is removed, you’ll be able to access the evaporator coil. Be sure to take all necessary safety precautions when working on any appliance.
How To Get To The Evaporator Coil On Amana Refrigerator
To access the evaporator coil on an Amana refrigerator, first unplug the refrigerator from the wall outlet. Then, remove the screws from the back panel, which is located at the bottom of the refrigerator. After that, remove the screws from the evaporator cover, which is located at the top of the refrigerator. Finally, remove the evaporator cover and the evaporator coil will be visible.
How To Get To The Evaporator Coil On Amana Refrigerator
1. Unplug the refrigerator from the power source.
2. Remove the screws from the back panel of the refrigerator.
3. Carefully lift off the back panel and set it aside.
4. Locate the evaporator coils on the back wall of the refrigerator.
5. Remove the screws that secure the evaporator coil to the back wall.
6. Carefully lift the evaporator coil out of the refrigerator.
7. Inspect the evaporator coil for any signs of damage or wear.
8. Clean the evaporator coil with a vacuum cleaner and a soft brush.
9. Replace the evaporator coil if it is damaged or worn.
10. Reinstall the evaporator coil and secure it with the screws.
11. Replace the back panel and secure it with the screws.
12. Plug the refrigerator back into the power source.
The evaporator coil on an Amana refrigerator can be accessed by first removing the back panel of the refrigerator. Once the back panel is removed, the evaporator coil can be accessed by removing the screws that hold it in place. After the screws are removed, the evaporator coil can be lifted out of the refrigerator and cleaned or replaced. To ensure that the evaporator coil is properly installed, it is important to follow the manufacturer’s instructions.