If your Maytag microwave door sensor is stuck and not working properly, you may need to take some steps to get it unstuck. This guide will walk you through the process of unjamming the door sensor on your Maytag microwave. First, you will need to locate the door sensor. It is usually located near the top of the door frame, and it looks like a small rectangular box. Next, you will need to remove the screws that hold the door sensor in place. Once the screws are removed, you should be able to pull the door sensor out of its frame. After that, you can use a pair of pliers to gently pry the door sensor open. Be sure to be careful not to damage the sensor as you are doing this. Once the door sensor is open, you should be able to see the contacts inside. Use a cotton swab and rubbing alcohol to clean the contacts.
How To Get The Door Sensor Unstuck In A Maytag Microwave
1. Unplug the microwave from the power source.
2. Locate the door sensor on the inside of the microwave.
3. Gently pull the door sensor away from the wall of the microwave to see if it is stuck.
4. If the door sensor is stuck, use a cotton swab dipped in rubbing alcohol to clean the area around the sensor.
5. Use a flat head screwdriver to carefully pry the sensor away from the wall.
6. If the sensor is still stuck, use a hairdryer to heat the area around the sensor for a few minutes.
7. Once the area is heated, use a flat head screwdriver to carefully pry the sensor away from the wall.
8. Reattach the door sensor to the wall of the microwave and plug the microwave back into the power source.
How To Get The Door Sensor Unstuck In A Maytag Microwave
In conclusion, the best way to get a door sensor unstuck in a Maytag microwave is to first check the hinges and make sure they are properly lubricated. If that does not work, then you can try to remove the door sensor and clean it with a cotton swab and rubbing alcohol. If that does not work, then you may need to replace the door sensor with a new one.