If you have an LG Auto Restart Dehumidifier, you may have noticed that it has the ability to be connected to a hose for continuous drainage. This is a great feature that can help you save time and energy by not having to empty the water tank manually. In this guide, we will show you how to get your LG Auto Restart Dehumidifier to drain through the back hose.
First, you will need to locate the hose connection on the back of your dehumidifier. It should be located near the bottom of the unit. Once you have located the connection, you will need to attach the hose to the connection. Make sure that the hose is securely attached and that there are no air leaks.
Next, you will need to make sure that the other end of the hose is connected to a drain or sump pump. This is important as it will allow the water to be drained away from the dehumidifier.
Suggested: How Do I Tell If A LG Dehumidifier Is Low Temperature
How To Get Lg Auto Restart Dehumidifier To Drain Through Back
Most LG dehumidifiers have a built-in drain hose that can be used to drain the collected water from the unit. To connect the hose, first remove the water bucket from the unit. Then, locate the drain hose connection port on the back of the dehumidifier. Insert the drain hose into the port, and secure it with the included clamp. Once the hose is connected, you can route the hose to a floor drain or a sink. Make sure the end of the hose is lower than the dehumidifier to ensure proper drainage. Finally, turn on the dehumidifier and set it to the desired humidity level. The unit will now automatically drain the collected water through the hose.
How To Get Lg Auto Restart Dehumidifier To Drain Through Back Hose
1. Place the dehumidifier on a flat surface.
2. Locate the back of the dehumidifier and locate the drain hose port.
3. Connect a garden hose to the drain hose port.
4. Place the other end of the garden hose in a suitable drainage area.
5. Turn the dehumidifier on and set the fan speed to the highest setting.
6. Select the “Auto Restart” option on the dehumidifier’s control panel.
7. Set the humidity level to the desired level.
8. The dehumidifier will begin to drain the water through the hose and into the drainage area.
The LG Auto Restart dehumidifier can be set up to drain through the back by connecting a hose to the drain port on the back of the unit. This will allow the dehumidifier to automatically drain the collected water, eliminating the need to manually empty the water tank. To ensure proper drainage, it is important to ensure that the hose is securely connected and that the hose is placed at a slight downward angle. With the hose properly connected, the LG Auto Restart dehumidifier will be able to drain the collected water automatically and efficiently.