If you have a Hotpoint top load washing machine, you can access diagnostic mode to help troubleshoot any issues you may be having. To enter diagnostic mode, start by unplugging the washing machine from the power source. Then, press and hold the “Start/Pause” button while plugging the machine back in. Once the machine has powered on, release the “Start/Pause” button and press the “Power” button. This will activate diagnostic mode. In diagnostic mode, you can view any error codes and troubleshoot any issues you may be having.
How To Get A Hotpoint Top Load Washing Machine To Diagnostic
To get a Hotpoint top load washing machine into diagnostic mode, first unplug the machine from the wall outlet. Then, press and hold the “Start/Pause” button and the “Delay Start” button simultaneously for five seconds. After five seconds, the machine will enter diagnostic mode and the “Delay Start” button will start to flash. If the machine does not enter diagnostic mode, try pressing and holding the “Start/Pause” and “Delay Start” buttons for a longer period of time. Once the machine is in diagnostic mode, the user can use the “Delay Start” button to cycle through the different diagnostic tests. When the desired test is selected, the user can press the “Start/Pause” button to start the test. The user can then use the “Delay Start” button to cycle through the different test results. To exit diagnostic mode, press and hold the “Start/Pause” and “Delay Start” buttons simultaneously for
How To Get A Hotpoint Top Load Washing Machine To Diagnostic
1. Unplug the washing machine from the wall outlet.
2. Press and hold the “Start/Pause” button.
3. Plug the washing machine back into the wall outlet.
4. While still holding the “Start/Pause” button, press and hold the “Power” button.
5. Release both buttons and the washing machine will enter diagnostic mode.
To get a Hotpoint top load washing machine into diagnostic mode, first unplug the machine from the wall outlet. Then press and hold the Start/Pause and Spin Speed buttons together for 5 seconds. The machine should then enter diagnostic mode and the Start/Pause light will blink. From there, you can use the diagnostic codes to troubleshoot any issues you may be having with the machine.