If you are having trouble with your LG washer, you may need to troubleshoot the code that is appearing on the display. This guide will help you identify the issue and provide steps to fix the code. First, you should identify the code that is appearing on the display. This code will provide information about the issue that needs to be addressed. Once you have identified the code, you should consult the owner’s manual for the specific instructions on how to fix the code. In some cases, the code may require a simple reset or a more complex repair. If the code requires a reset, you should unplug the washer and wait for a few minutes before plugging it back in. If the code requires a more complex repair, you should contact a qualified technician to help you diagnose and repair the issue.
How To Fix Ue Code On Lg Washer
The UE code on an LG washer indicates an unbalanced load. To fix this, try redistributing the load in the washer and restart the cycle. If the UE code still appears, you may need to call a service technician to check the washer for any mechanical issues.
How To Fix Ue Code On Lg Washer
1. Unplug the washer from the wall outlet and leave it unplugged for at least one minute.
2. Press and hold the START/PAUSE button for three seconds.
3. Plug the washer back into the wall outlet.
4. Press the POWER button to turn the washer on.
5. Press the START/PAUSE button to begin a cycle.
6. If the UE code appears again, press the START/PAUSE button to pause the cycle.
7. Unplug the washer from the wall outlet and leave it unplugged for at least one minute.
8. Plug the washer back into the wall outlet.
9. Press the POWER button to turn the washer on.
10. Press the START/PAUSE button to begin a cycle.
11. If the UE code appears again, contact an LG authorized service center for assistance.
To fix UE code on an LG washer, the first step is to unplug the washer from the power source and wait for a few minutes before plugging it back in. If the UE code persists, check the water supply and ensure that the water supply hose is not kinked or blocked. If the water supply is fine, then the issue may be with the drain hose. Make sure the drain hose is not clogged or blocked and that it is properly connected to the drain. If the UE code continues to appear, the issue may be with the washer’s control board. In this case, it is best to contact a professional for assistance.