If your Samsung washer is displaying an error code, it may be possible to fix the issue without needing to call a technician. This guide will show you how to troubleshoot and fix common Samsung washer error codes. First, you will need to identify the error code that is being displayed on the washer. Once you have identified the error code, you can then look up the specific instructions for resolving the issue. Depending on the error code, you may need to reset the washer, replace a part, or perform a diagnostic test. Follow the instructions carefully and you should be able to fix the issue without needing to call a technician.
How To Fix Sc On Samsung Washer
1. Unplug the washer from the wall outlet.
2. Check the drain hose for any blockages or kinks.
3. Clean the filter in the drain hose.
4. Check the drain pump for any clogs or blockages.
5. Check the water supply hoses for any kinks or blockages.
6. Check the water inlet valve for any blockages or debris.
7. Check the pressure switch for any clogs or debris.
8. Check the wiring harness for any loose connections or damage.
9. Reset the washer by pressing and holding the start/pause button for 3 seconds.
10. Plug the washer back into the wall outlet and run a test cycle.
The best way to fix a SC error code on a Samsung washer is to check the drain hose for any blockages or kinks, clean the filter, and make sure the drain hose is properly connected to the drain pipe. If the error code persists, it may be necessary to replace the drain pump. If the issue is still unresolved, it is best to contact a qualified technician for further assistance.