If your Samsung washer is displaying an error code 4C, it is likely due to a problem with the water level. This error code can be fixed by following a few simple steps. First, check to make sure that the water supply is turned on and that the hoses are connected properly. If everything looks okay, then you will need to reset the water level. To do this, press and hold the “Power” and “Spin” buttons simultaneously for 3 seconds. After the reset is complete, the washer should be ready to use. If the error code persists, then it may be necessary to contact a professional for further assistance.
How To Fix Samsung Washer Error Code 4C
Error code 4C on Samsung washers indicates a water supply issue. To fix this issue, check the water supply lines and make sure they are connected properly and the water pressure is adequate. If the lines are connected and the water pressure is good, then the water valve may be faulty and needs to be replaced.
How To Fix Samsung Washer Error Code 4C
1. Unplug the washer from the power outlet.
2. Wait for at least 10 minutes and then plug the washer back in.
3. Press and hold the Start/Pause button for 5 seconds.
4. Select the Rinse/Spin cycle.
5. Press the Start/Pause button again to begin the cycle.
6. When the cycle is complete, unplug the washer again and wait for 10 minutes.
7. Plug the washer back in and select the Normal cycle.
8. Press the Start/Pause button to begin the cycle.
9. If the error code 4c is still displayed, contact Samsung customer service for further assistance.
The best way to fix a Samsung washer error code 4C is to check the drain hose for any blockages or kinks, and to make sure the drain hose is securely connected to the drain. If the error code persists, the user should contact Samsung customer service for further assistance.