If your Maytag OTR microwave’s fan won’t cut off, it may be due to a faulty fan motor or a faulty switch. Fortunately, this is a relatively easy problem to fix. In this guide, we’ll walk you through the steps to diagnose and repair the issue. You’ll need a few basic tools and some patience to get the job done. Let’s get started!
How To Fix Maytag Otr Microwave That Fan Wont Cut Off
1. Check the wiring: Make sure that all the wires connected to the microwave are secure and that none of them have become loose.
2. Check the fan: Make sure the fan is not blocked or obstructed in any way.
3. Check the circuit breaker: Make sure the circuit breaker is not tripped.
4. Check the fan switch: Make sure the fan switch is in the “On” position.
5. Check the fan motor: If the fan motor is faulty, it may need to be replaced.
6. Check the control board: If the control board is faulty, it may need to be replaced.
7. Reset the microwave: Unplug the microwave and plug it back in to reset it.
The best way to fix a Maytag OTR microwave that won’t cut off its fan is to check the ventilation system and make sure it is clear of any obstructions. If the ventilation system is clear, then the fan motor may need to be replaced. If the fan motor needs to be replaced, then a qualified technician should be consulted to ensure that the repair is done correctly. Once the fan motor is replaced, the microwave should be tested to make sure that it is working properly.