If your Kenmore washer won’t drain, it can be a frustrating experience. Fortunately, there are a few steps you can take to diagnose and fix the problem. In this guide, we’ll walk you through the process of troubleshooting and repairing your Kenmore washer so that it will drain properly. We’ll cover common causes of a washer that won’t drain, how to test the drain system, and how to clean the drain pump and filter. With the right tools and knowledge, you can get your washer draining again in no time.
How To Fix Kenmore Washer That Won’t Drain
This article provides a step-by-step guide on how to diagnose and fix a Kenmore washing machine that won’t drain. First, it is important to check the drain hose for any blockages, as this is the most common cause of a washer not draining. If the hose is clear, the pump should be checked for any debris or clogs. If the pump is clear, the belt should be inspected for signs of wear and tear. If the belt is in good condition, the motor should be tested for proper operation. Finally, the timer should be checked for any issues. If all of these steps are followed and the washer still won’t drain, it is recommended to contact a professional for further assistance.
How To Fix Kenmore Washer That Won’t Drain
1. Check the drain hose for any kinks or bends that may be blocking the water from draining.
2. Check the drain pump filter for any clogs or debris that may be preventing the water from draining.
3. Make sure that the drain hose is connected securely to the drain pipe.
4. Check the drain pump for any signs of damage or wear and tear.
5. Check the drain pump belt for any signs of wear and tear.
6. Check the water level switch for any signs of damage or wear and tear.
7. Check the water inlet valve for any signs of damage or wear and tear.
8. Replace any damaged or worn out parts.
9. Clean out the drain pump filter.
10. Reset the washer and run a cycle to make sure that the issue is resolved.
In conclusion, the best way to fix a Kenmore washer that won’t drain is to first check the drain hose for clogs or kinks, and then check the drain pump for any obstructions. If these two steps do not solve the problem, then it may be necessary to replace the drain pump or the drain hose. Additionally, it is important to check the owner’s manual for any specific instructions on how to troubleshoot and repair the washer. With these steps, you should be able to get your washer draining properly again.