If you’re having trouble with your Samsung washer, it could be due to a faulty FL code. This code can indicate a few different issues, but fortunately, it’s usually easy to fix. In this guide, we’ll walk you through the steps to troubleshoot and fix the FL code on your Samsung washer. We’ll cover the most common causes of the FL code and provide instructions on how to fix them. So let’s get started!
How To Fix Fl Code On Samsung Washer
The F1 code on a Samsung washer indicates a water supply issue. To fix this issue, check the water supply and make sure it is turned on and the hoses are connected properly. If the water supply is working, then check the pressure switch and make sure it is working properly. If the pressure switch is not working, then replace it.
How To Fix Fl Code On Samsung Washer
1. Unplug the washer from the power source.
2. Check the drain hose for any clogs or kinks.
3. Check the drain pump filter for any blockages.
4. Check the drain pump motor for any damage or debris.
5. Check the drain hose connection to the wall or sink.
6. Check the water supply hoses for any kinks or blockages.
7. Check the pressure switch for any damage.
8. Check the water level pressure switch for any damage.
9. Check the water inlet valve for any damage or debris.
10. Check the main control board for any damage or loose connections.
11. Reset the washer by pressing and holding the start/pause button for 3 seconds.
12. Reconnect the power source to the washer and run a test cycle.
The best way to fix the FL code on a Samsung washer is to check the drain hose for any blockages, clean the filter, and make sure the water supply is connected properly. If these steps do not resolve the issue, then it may be necessary to contact a professional for further assistance.