If you are experiencing an F5 error on your Whirlpool washer, it is likely due to a faulty water level pressure switch. This switch is responsible for detecting the water level in the washer and sending a signal to the control board when the water level is low or high. Fortunately, this error can be easily fixed by replacing the faulty switch. In this guide, we will walk you through the steps of replacing the water level pressure switch on a Whirlpool washer.
How To Fix F5 Error On Whirlpool Washer
The F5 error code on a Whirlpool washer indicates a problem with the door lock assembly. To fix this issue, you should first check the wiring harness and connections to the door lock assembly. If the wiring is secure and the connections are good, then the door lock assembly will likely need to be replaced.
How To Fix F5 Error On Whirlpool Washer
1. Unplug the washer from the power source.
2. Check the water supply hoses to make sure they are securely connected to the water inlet valves.
3. Check the drain hose for any blockages or kinks.
4. Clean the filter screen on the inlet valve and check for any debris.
5. Check the water pressure and make sure it is within the recommended range.
6. Check the drain pump for any obstructions and clean out any debris.
7. Check the control board for any loose connections or damaged components.
8. Reset the washer by pressing and holding the start/pause button for 3 seconds.
9. Plug the washer back in and run a test cycle to see if the F5 error code is still present.
10. If the error code persists, contact a qualified service technician for further assistance.
The F5 error on a Whirlpool washer can be fixed by resetting the washer, checking the water supply, checking the drain hose, and checking the pressure switch. If the error persists, it may be necessary to call a professional to inspect the washer and repair any underlying issues. By following these steps, the F5 error can be fixed and the washer can be used as normal.